LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Gladiator Mojave, Part Time T/Case Control, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Front Power Seats (Service Information)) >> Switch, Lumbar Control >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector to the power lumbar control switch. Make sure the connector is fully engaged to the switch.
  2. Position the lumbar control switch to the seat cushion side trim panel and engage the four retaining tabs that secure the switch to the trim panel. Make sure the retaining tabs are fully engaged.
  3. Install the outboard seat cushion side trim panel. Refer to SIDE SHIELDS, SEAT CUSHION, FRONT, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals