LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Gladiator Mojave, Part Time T/Case Control, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Power Liftgate (Service Information)) >> Switch, D-Pillar >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Seat the liftgate switch into the D-pillar until all of the switch retaining clips are engaged.
    GC0178028Courtesy of CHRYSLER GROUP, LLC
  2. Connect the wiring harness connector (2) to the liftgate switch (1).
  3. Install the left D-pillar. Refer to PANEL, D-PILLAR TRIM, REMOVAL AND INSTALLATION .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals