KEYFOB Transmitter: Notes
WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
Use a Radio Frequency Detector such as special tool (#9001, Rf Detector) to confirm that the Remote Keyless Entry (RKE) transmitter is functioning. Typical testing distance is 30.5 centimeters (12 inches).
- Position the transmitter the appropriate distance from the special tool.
- Depress any transmitter button, then test each button individually. The special tool will issue an audible beep tone if a satisfactory radio signal strength that lights five or more Light Emitting Diode (LED) units is detected.
- Repeat Step 2 three times. If the transmitter fails any of the signal strength tests, use a diagnostic scan tool and the appropriate diagnostic information to complete further diagnosis.