LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Gladiator Mojave, Part Time T/Case Control, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Power Locks (Service Information)) >> Description And Operation >> Description >> Remote Keyless Entry System

Remote Keyless Entry System

WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.

The Remote Keyless Entry (RKE) system is standard factory-installed equipment on this vehicle. The RKE system includes the following major components, which are described in further detail elsewhere in this service information:

These components and their controls are combined to provide the following RKE system features:

Hardwired circuitry connects many of the RKE system components to the electrical system of the vehicle. These hard wired circuits are integral to several wire harnesses, which are routed throughout the vehicle and retained by many different methods. These circuits may be connected to each other, to the vehicle electrical system and to the RKE system components through the use of a combination of soldered splices, splice block connectors, and many different types of wire harness terminal connectors and insulators. Refer to the appropriate wiring information. The wiring information includes wiring diagrams, further details on wire harness routing and retention, as well as pin-out and location views for the various wire harness connectors, splices and grounds.