Removal And Installation: Removal
WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Install the tire and wheel assembly. Refer to REMOVAL AND INSTALLATION
.
- Remove and DISCARD the hub nut (1).
- Remove the rear hub. Refer to HUB AND BEARING, REMOVAL AND INSTALLATION
.
- Using a pry bar or equivalent, partially dislodge the halfshaft (1) from the Rear Drive Module (RDM).
- Use a jack stand to compress the suspension and remove the halfshaft from the vehicle.