LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Gladiator Mojave, Part Time T/Case Control, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 ((Active Cruise Control Module (Acc) - Electrical Diagnostics)) >> Standard Procedure >> Adaptive Cruise Control (Acc) Verification Test >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.

ACC Verification Test 

  1. Disconnect all jumper wires and reconnect all previously disconnected components and connectors.
  2. With the scan tool, erase Adaptive Cruise Control (ACC) DTCs.
  3. Make sure that all accessories are turned off and that the battery is fully charged.
  4. If the ACC Module was replaced or moved in any way, the ACC Module must be aligned. Perform the Adaptive Speed Control Sensor Alignment procedure in accordance with the Service Information. Refer to MODULE, ADAPTIVE CRUISE CONTROL (ACC), MODULE PROGRAMMING .
  5. Test drive the vehicle and verify proper operation.
  6. With the scan tool, read ACC Module DTCs and record on the repair order.

    Are any DTCs present in the ACC Module?

    Yes 

    No 

    • Repair is complete.
scientia non olet · About LEMON Manuals