Removal And Installation: Removal

WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.

With the scan tool, run the Rear Driveline Module (RDM) Bleed to park the RDM. The RDM is in the parked position when the message "The rear differential fluid level can now be topped off, press Continue after filling fluid level" is displayed.
Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .

Courtesy of CHRYSLER GROUP, LLC
Disconnect the pump motor wire harness connector (1).
Position a drain pan under the RDM.

Courtesy of CHRYSLER GROUP, LLC
Do not remove the fasteners securing the motor to the pump (2). Remove the three pump motor bolts (1).

Courtesy of CHRYSLER GROUP, LLC
Remove the pump motor assembly (1) from the RDM.
CAUTION:
Do not use motor housing as a lever or handle when removing pump and motor assembly, damage to the pump or motor may result.