Diagnostic Test

CHECK FOR AN ACTIVE DTC PRESENT IN TRANSMISSION CONTROL MODULE

NOTE:

The TCM sends a request to the Powertrain Control Module (PCM) to shut the engine off when it detects certain malfunctions in the transmission.

This is an informational DTC to inform you that there is a DTC stored in the Transmission Control Module.
Erase this DTC from the PCM after all TCM DTCs have been repaired.
Test drive or operate the vehicle in the conditions that set the original DTC.
Using a scan tool, read the TCM DTCs.
Did any TCM DTCs return?

Yes
- Perform the applicable diagnostic procedure(s). Refer to POWERTRAIN VERIFICATION TEST .
No
- Perform the INTERMITTENT CONDITION diagnostic procedure. Refer to INTERMITTENT CONDITION .