LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Gladiator Mojave, Part Time T/Case Control, Automatic Trans >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Cluster (Service Information) >> Standard Procedure >> Enhanced SEATBELT Reminder Programming >> Customer Programming Sequence

Customer Programming Sequence

NOTE:

The following sequence of events must occur within 60 seconds of the ignition being placed in the ON position in order for the programming to be completed successfully.

Perform the following procedure to modify the BELTMINDER feature:

  1. With all doors closed and the ignition in any position except ON or START, buckle the driver side front seat belt.
  2. Cycle the ignition to the ON position and wait for the seatbelt indicator reminder function to conclude (about six seconds).
  3. Unbuckle and buckle the driver side front seat belt three or more times, ending with the belt buckled.
  4. Cycle the ignition to any position except ON or START to toggle the BELTMINDER feature from its current setting (from active to inactive, or from inactive to active). A single chime tone will provide an audible confirmation that the programming sequence has been successfully completed.
scientia non olet · About LEMON Manuals