LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Gladiator Mojave, Part Time T/Case Control, Automatic Trans >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Wheel Hubs >> Front Suspension & Wheel Alignment >> Front >> Technical Specifications >> Torque Specifications >> Front Stabilizer Bar

Front Stabilizer Bar

GC0205908Courtesy of CHRYSLER GROUP, LLC
TORQUE SPECIFICATIONS - FRONT STABILIZER BAR

CALLOUT DESCRIPTION SPECIFICATION COMMENT
1 Stabilizer Bar Link Upper Nut 115 N. m (85 Ft. Lbs.)  -
2 Stabilizer Bar Link Lower Bolt 90 N. m (66 Ft. Lbs.)  -
3 Stabilizer Bar Bolts 63 N. m (46 Ft. Lbs.)  Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications.
4 Stabilizer Bar Actuator Bolts 25 N. m (18 Ft. Lbs.)  -