Diagnostic Test
- CHECK FOR AN ACTIVE DTC
- Test drive the vehicle.
- Park the vehicle on a level surface and allow to idle for a minimum of 10 seconds.
- With the scan tool, erase ACC DTCs.
- Turn the ignition off.
- Start the engine.
- With the scan tool read ACC DTCs.
Does this DTC return?
Yes
- Go To 2
No
- Perform the TESTING FOR AN INTERMITTENT CONDITION. Refer to TESTING FOR AN INTERMITTENT CONDITION .
- ANTI-LOCK BRAKE SYSTEM
- This DTC is an informational DTC indicating that there is a DTC stored in the Anti-lock Brake System (ABS) Module.
Repair
- Repair the ABS DTC(s). Refer to DTC TROUBLESHOOTING
.NOTE:
It may be necessary to perform the ABS Initialization routine with the scan tool to reset the vehicle configuration.
- Repair the ABS DTC(s). Refer to DTC TROUBLESHOOTING
.
- This DTC is an informational DTC indicating that there is a DTC stored in the Anti-lock Brake System (ABS) Module.