LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Compass Altitude, FWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Front >> Hub And Bearing >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the tire and wheel assembly. Refer to HOISTING, STANDARD PROCEDURE .
  3. Remove the front brake rotor. Refer to ROTOR, BRAKE, REMOVAL AND INSTALLATION .
    GC0179350Courtesy of CHRYSLER GROUP, LLC
  4. With an appropriate tool, unstake the hub nut (2).
  5. Remove and DISCARD  the hub nut (2).
  6. Remove and DISCARD  the four front hub and bearing bolts (1).
  7. Remove the hub and bearing (3).
scientia non olet · About LEMON Manuals