LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Compass Altitude, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> (Forward Facing Camera Module (FFCM) - Electrical Diagnostics) >> Standard Procedure >> Forward Facing Camera Verification Test

Forward Facing Camera Verification Test

  1. Disconnect all jumper wires and reconnect all previously disconnected components and connectors.
  2. With the scan tool, erase Forward Facing Camera (FFCM) DTCs.
  3. Make sure that all accessories are turned off and that the battery is fully charged.
  4. If the FFCM was replaced or moved in any way, the FFCM must be aligned. Perform the Forward Facing Camera Calibration Procedure in accordance with the Service Information. Refer to MODULE, FORWARD FACING CAMERA (FFCM), MODULE PROGRAMMING .
  5. With the scan tool, read FFCM DTCs.

    Are any DTCs present in the FFCM?

    Yes 

    No 

    • Repair is complete.
scientia non olet · About LEMON Manuals