Link, Stabilizer Bar: Installation
- Install the stabilizer link (2) upper stud in the end of the stabilizer bar from the outboard side. Install the stabilizer link nut (1) to the upper stud and while holding the stabilizer link stud stationary, tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS
.
- Attach the stabilizer bar link to the spring link (6). Install the stabilizer link nut to spring link (5) and while holding the stabilizer bar link lower stud stationary, tighten the to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
- Remove the support and lower the vehicle.