LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Cherokee Trailhawk >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (2.0L Engine (Service Information)) >> Engine Mounting >> Bracket, Engine Mount, Left >> Installation

Bracket, Engine Mount, Left: Installation

WARNING: This page is about a different variant/trim than selected.
GC0186562Courtesy of CHRYSLER GROUP, LLC
  1. Install the left engine mount bracket (1) and tighten the four bolts (2) to the proper torque specification. Refer to (TORQUE SPECIFICATIONS ).
  2. Install the left engine mount insulator. Refer to INSTALLATION  .
  3. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals