LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Cherokee Trailhawk >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.2L Engine (Service Information) >> Engine Block >> Damper, Vibration >> Removal

Damper, Vibration: Removal

GC0158465Courtesy of CHRYSLER GROUP, LLC
NOTE:

The serpentine belt does not need to be fully removed from the vehicle.

  1. Rotate the belt tensioner (1) counterclockwise and remove the serpentine belt (4) from the crankshaft vibration damper (8) only.
    NOTE:

    A force greater than 350 N. m (260 ft. lbs.) may be required to remove the crankshaft vibration damper bolt.

    GC0144221Courtesy of CHRYSLER GROUP, LLC
  2. Hold the crankshaft vibration damper (1) with Vibration Damper Holder (special tool #10198, Holder, Vibration Damper) (2) and remove the crankshaft vibration damper bolt.
  3. Pull the crankshaft vibration damper (1) from the crankshaft.
scientia non olet · About LEMON Manuals