LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Cherokee Trailhawk >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Emergency Assistance (EAM) >> Installation >> Backup Battery

Backup Battery

GC0175234Courtesy of CHRYSLER GROUP, LLC
  1. Position the backup battery (2) to the EAM (1) and connect the positive battery connector first, then connect the negative battery connector.
  2. Gently insert the backup battery (2) into the EAM (1).
  3. Install the backup battery cover (3).
  4. Install the EAM into the vehicle. Refer to MODULE, EMERGENCY ASSISTANCE (EAM), INSTALLATION .
  5. Start the engine and check if "Service Required" indicator or message on the Instrumental Panel Cluster (IPC) turns off.
scientia non olet · About LEMON Manuals