Sensor, Manifold Absolute Pressure (Map): Installation: 2.4L

WARNING: This page is about a different variant/trim than selected.

Courtesy of CHRYSLER GROUP, LLC

Inspect and replace the O-ring seal (1) as necessary.

Courtesy of CHRYSLER GROUP, LLC
Install Manifold Absolute Pressure (MAP) sensor (1) and rotate 90° clockwise to lock in place.
Connect the MAP sensor wire harness connector (2).
Install the belly pan. Refer to BELLY PAN, INSTALLATION .
Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.