LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Cherokee High Altitude, Full Time T/Case Control >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (2.4L Engine (Service Information)) >> Lubrication >> Sensor, Oil Temperature >> Removal

Sensor, Oil Temperature: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the engine cover and clean air hose. Refer to HOSE, CLEAN AIR, REMOVAL .
    GC0169915Courtesy of CHRYSLER GROUP, LLC
  3. Unlock and disconnect the oil temperature sensor harness connector (2).
  4. Disengage the oil temperature harness connector from the bracket (1).
    GC0152505Courtesy of CHRYSLER GROUP, LLC
  5. Use an appropriate socket (2) and remove the oil temperature sensor (1).
    GC0152506Courtesy of CHRYSLER GROUP, LLC
  6. The oil temperature sensor gasket (1) can be reused if not damaged.
scientia non olet · About LEMON Manuals