LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Cherokee High Altitude, Full Time T/Case Control >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (2.4L & 3.2L Cooling System) >> Engine >> Fan, Cooling >> Removal >> 2.4L

Fan, Cooling: Removal: 2.4L

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the pressurized coolant bottle. Refer to BOTTLE, PRESSURIZED COOLANT, REMOVAL .
    GC0186592Courtesy of CHRYSLER GROUP, LLC
  3. Remove the bolt (2), the two screws (3) and remove the resonator (1).
    GC0187108Courtesy of CHRYSLER GROUP, LLC
  4. Remove the two push pins (2) and the air intake tube (1).
  5. Remove the hood latch and cables. Refer to LATCH, HOOD, REMOVAL .
    GC0186842Courtesy of CHRYSLER GROUP, LLC
  6. Disconnect the cooling fan module wire harness connector (2) and remove the wire harness (1) from upper radiator panel (3).
    GC0186859Courtesy of CHRYSLER GROUP, LLC
  7. Remove the screws (1) and the upper radiator panel (2).
    GC0186622Courtesy of CHRYSLER GROUP, LLC
  8. Remove the six bolts (1, 2) and the upper core support (3).
    GC0186387Courtesy of CHRYSLER GROUP, LLC
  9. Remove the upper radiator hose (1).
    GC0187081Courtesy of CHRYSLER GROUP, LLC
  10. Remove the bolts (1) and the cooling fan (2).
scientia non olet · About LEMON Manuals