LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Cherokee High Altitude, Full Time T/Case Control >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Emergency Assistance (EAM) >> Removal >> Speaker

Module, Emergency Assistance (EAM): Removal: Speaker

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
    GC0187094Courtesy of CHRYSLER GROUP, LLC
  2. Remove the center dash speaker grill (1) using a trim tool or equivalent and carefully pry up around the grill releasing the lock tabs.
    GC0186396Courtesy of CHRYSLER GROUP, LLC
  3. Remove the fasteners (1) from the Emergency Assistance Module (EAM) speaker (3).
  4. Lift the speaker up enough to disconnect the instrument panel wire harness connector (2) from the EAM speaker (3).
  5. Remove the EAM speaker (3) from the vehicle.
scientia non olet · About LEMON Manuals