LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Cherokee High Altitude, Automatic T/Case Control >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> 2.0L Fuel System >> Fuel Injection, Gas >> Pedal, Accelerator >> Installation

Pedal, Accelerator: Installation

GC0187031Courtesy of CHRYSLER GROUP, LLC
  1. Install the accelerator pedal. Tighten the three screws (2) to the proper torque specification. Refer to (TORQUE SPECIFICATIONS ).
  2. Connect the accelerator pedal wire harness connector (1).
  3. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  4. Use a scan tool and perform the APPS RELEARN function.
scientia non olet · About LEMON Manuals