Vented Seats

The vented seats are controlled by the Comfort Seat and Wheel Module (CSWM). The module provides a pulse width modulated signal to drive the brushless fan seat motors. When the vented seat switch is selected, a CAN-IHS message is delivered to the CSWM to operate the vented seat system. The vented seats have two selectable speeds. Each press of the vented seat indicator will cause the vented seat to change venting modes in order from OFF to HI, HI to LO, and LO to OFF. The vented seats only operate with the engine running. Both vented seats operate independently from each other and they will not operate at the same time as the heated seats. To review vented seat activation information, please. Refer to SWITCH, VENTED SEAT, DESCRIPTION .

Stop/Start Integration -  The vented seats will continue to function during a Stop/Start event unless the engine RPM is below 400. The system will suspend operation until 400 RPM has been achieved.