LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Renegade Trailhawk >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Column >> Wheel, Steering >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0208221Courtesy of CHRYSLER GROUP, LLC
  1. If removed, install the steering wheel switches.
  2. Connect the steering wheel wire harness connector (1).
  3. Position the steering wheel to the shaft, aligning the references on the steering wheel and on the steering column.
    GC0208222Courtesy of CHRYSLER GROUP, LLC
  4. Install the steering wheel nut (2) and tighten to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  5. Install the steering wheel nut cover (1).
  6. Install the drivers airbag. Refer to AIR BAG, DRIVER, INSTALLATION .
  7. Power up the high voltage system . Refer to the appropriate service information.
scientia non olet · About LEMON Manuals