LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (2.4L Engine (Service Information)) >> Cover, Engine >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different variant/trim than selected.
GC0174642Courtesy of CHRYSLER GROUP, LLC
  1. Lubricate the three rubber mount sockets on the engine cover with Mopar® Rubber Bushing Installation Lube.
  2. Align the rubber mount sockets of the engine cover (2) to the three ball studs and press firmly downwards.
  3. Install the bolt (1) and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals