LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (2.4L Fuel System) >> Fuel Injection >> Sensor, Crankshaft Position >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the crankshaft position sensor and tighten the screw to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  2. Connect and lock the wire harness connector.
  3. Install the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals