LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Renegade Trailhawk >> Repair and Diagnosis >> Engine Mechanical >> 1.3L Fuel System >> Fuel Delivery >> Sending Unit And Sensor, Fuel Level >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install the fuel level sensor, complete with float, engage the clips of the submerged fuel pump drum.
  2. Connect the wire harness connector to the fuel level sending unit.
  3. Install the fuel pump module. Refer to MODULE, FUEL PUMP, INSTALLATION  .
scientia non olet · About LEMON Manuals