Pump, Transmission Oil: Installation

Courtesy of CHRYSLER GROUP, LLC

1. Install NEW  inner (1) and outer (2) oil pump O-rings.
2. Position and firmly press the oil pump in place by hand before drawing it in with bolts.

   Courtesy of CHRYSLER GROUP, LLC

3. Install the NEW  oil pump cover retaining bolts (2) and tighten the bolts as follows:

   Courtesy of CHRYSLER GROUP, LLC

   1. In order to seat the oil pump cover properly, pre tighten bolts one, seven and nine to 6 N.m (53 in. lb.).
   2. Working in a clockwise pattern, beginning with number one, tighten to 10 N.m (89 in. lb.).
   3. Working in a clockwise pattern, beginning with number one, tighten an additional 90°.

   Courtesy of CHRYSLER GROUP, LLC

4. Install the NEW  input shaft O-ring (1).
5. Install the valve body. Refer to VALVE BODY, INSTALLATION .
6. Install the transmission. Refer to INSTALLATION .