Sensor, Differential Pressure: Removal: 6.4L

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect the negative battery cable.
2. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
3. If equipped, remove the transmission skid plate. Refer to PLATE, SKID, TRANSMISSION, REMOVAL .
4. If required, remove the Differential Pressure Sensor (DPS) metal tubing fitting (4).
5. Disconnect the DPS electrical connector (2).
6. Disconnect the DPS hose (3).
7. Remove the bolt (1) with the DPS.
8. Remove the DPS from the bracket.