Wheel, Steering: Installation

WARNING: This page is about a different car, the 2019 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of CHRYSLER GROUP, LLC

Install steering wheel (2) onto the column.
NOTE:
Do not reuse the old steering wheel bolt (1) (a new bolt must be used)

NOTE:
Be certain that the steering wheel mounting bolt is tightened to the proper torque specification to ensure proper clockspring operation.
Install steering wheel damper, if equipped.
Install the new steering wheel bolt (1). Tighten the bolt to 57 N.m (42 ft. lbs.).
Reconnect all electrical connectors.
Install the drivers side air bag. Refer to AIR BAG, DRIVER, INSTALLATION .
Reconnect the negative (ground) cable to the battery.