5.7L / 6.4L
WARNING: This page is about a different car, the 2019 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Apply MOPAR® thread sealant with PFTE to the sensor threads.
- Install the coolant temperature sensor (2) into water pump housing.
- Tighten the coolant temperature sensor to 11 N.m (8 ft. lbs.).
- Connect the coolant temperature sensor electrical connector (3).
- Install air intake system. For 5.7L, Refer to BODY, AIR CLEANER, INSTALLATION . For 6.4L, Refer to BODY, AIR CLEANER, INSTALLATION .
- Replace any lost engine coolant. Refer to STANDARD PROCEDURE .