Fan, Cooling: Installation: 3.6L/5.7L/6.4L
WARNING: This page is about a different car, the 2019 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- If removed, install the upper shroud cover (1). Apply pressure downwards until the cover snaps into place past clips (2).
- Install cooling fan assembly into vehicle.
- Guide the fan/shroud cover assembly into position between the radiator and upper core support.
- Position cooling fan assembly onto the mounts (3) located on the radiator.
- Lock in the fan (1) assembly into place by pressing down firmly on the shroud till the locks (3) engage.
- If equipped, install the lower engine cover.
- Lower vehicle.
- Connect electric fan electrical connector (2).
- If removed, install the throttle body assembly. Refer to THROTTLE BODY, INSTALLATION .
- Install the air intake assembly.
- Connect negative battery cable.
- Start engine and check fan operation.