Set-To Specifications
NOTE:
Specifications are in degrees.
NOTE:
With service there is both a set-to and service measurement check specifications. Set-to specifications are the parameters and tolerances used when adjusting alignment is necessary. A measurement specification is for the initial measurement of a vehicle in service. If this vehicle does not pass the measurement specification then the alignment should be adjusted to the set-to specification. Measurement specification is due to variation from measurement tools and setting.
| Front Alignment Specifications | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Total Toe (1) | Left Caster | Right Caster | Cross Caster | Left Camber | Right Camber | Cross Camber | |||
| Aero Suspension | 0.20° +/- 0.13° | 7.32° +/- 0.50° | 7.32° +/- 0.50° | 0.00° +/- 0.50° | -0.63° +/- 0.50° | -1.03° +/- 0.50° | 0.40° +/- 0.50° | ||
| Base Suspension (LHD) | 0.20° +/- 0.13° | 6.95° +/- 0.50° | 6.95° +/- 0.50° | 0.00° +/- 0.50° | -0.38° +/- 0.50° | -0.78° +/- 0.50° | 0.40° +/- 0.50° | ||
| Base Suspension (RHD) | 0.20° +/- 0.13° | 7.15° +/- 0.50° | 6.75° +/- 0.50° | 0.40° +/- 0.50° | -0.88° +/- 0.50° | -0.28° +/- 0.50° | -0.60° +/- 0.50° | ||
| Air Suspension (Aero Mode) (LHD) | 0.20° +/- 0.13° | 7.55° +/- 0.50° | 7.55° +/- 0.50° | 0.00° +/- 0.50° | -0.75° +/- 0.50° | -1.15° +/- 0.50° | 0.40° +/- 0.50° | ||
| Air Suspension (Aero Mode) (RHD) | 0.20° +/- 0.13° | 7.75° +/- 0.50° | 7.35° +/- 0.50° | 0.40° +/- 0.50° | -1.25° +/- 0.50° | -0.65° +/- 0.50° | -0.60° +/- 0.50° | ||
| SRT8 (LHD) (with 3 season tires) | 0.20° +/- 0.13° | 6.67° +/- 0.55° | 6.67° +/- 0.55° | 0.00° +/- 0.55° | -1.68° +/- 0.55° | -1.98° +/- 0.55° | 0.30° +/- 0.55° | ||
| SRT8 (RHD) (with 3 season tires) | 0.20° +/- 0.13° | 6.67° +/- 0.55° | 6.67° +/- 0.55° | 0.00° +/- 0.55° | -1.98° +/- 0.55° | -1.68° +/- 0.55° | -0.30° +/- 0.55° | ||
| SRT8 (LHD) (with 4 season tires) | 0.20° +/- 0.13° | 6.67° +/- 0.55° | 6.67° +/- 0.55° | 0.00° +/- 0.55° | -1.68° +/- 0.55° | -1.98° +/- 0.55° | 0.30° +/- 0.55° | ||
| SRT8 (RHD) (with 4 season tires) | 0.20° +/- 0.13° | 6.67° +/- 0.55° | 6.67° +/- 0.55° | 0.00° +/- 0.55° | -1.98° +/- 0.55° | -1.68° +/- 0.55° | -0.30° +/- 0.55° | ||
| SRT8 (Trackhawk) | 0.20° +/- 0.13° | 7.00° +/- 0.55° | 7.00° +/- 0.55° | 0.00° +/- 0.55° | -1.68° +/- 0.55° | -1.98° +/- 0.55° | 0.30° +/- 0.55° | ||
| Notes: | |||||||||
| Positive toe (+) is toe-in and negative toe (-) is Toe-out. | |||||||||
|
|||||||||
| Rear Alignment Specifications | |||||||
|---|---|---|---|---|---|---|---|
| LHD and RHD | Toe | Total Toe (1) | Thrust Angle | Camber | Cross Camber | ||
| Aero Suspension | 0.10° +/- 0.15° | 0.20° +/- 0.30° | 0.00° +/- 0.15° | -0.88 +/- 0.55 | 0.00° +/- 0.50° | ||
| Base Suspension | 0.10° +/- 0.15° | 0.20° +/- 0.30° | 0.00° +/- 0.15° | -0.54 +/- 0.55° | 0.00° +/- 0.50° | ||
| Air Suspension (Aero Mode) | 0.20° +/- 0.15° | 0.40° +/- 0.30° | 0.00° +/- 0.15° | -1.09° +/- 0.55° | 0.00° +/- 0.50° | ||
| SRT8 | 0.125° +/- 0.10° | 0.25° +/- 0.20° | 0.00° +/- 0.10° | -1.30° +/- 0.40° | 0.00° +/- 0.55° | ||
| Notes: | |||||||
| Positive toe (+) is toe-in and negative toe (-) is Toe-out. | |||||||
|
|||||||