LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Grand Cherokee Laredo, AWD, Automatic T/Case Control >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Steering System) >> Column >> Wheel, Steering >> Removal

Wheel, Steering: Removal

WARNING: This page is about a different car, the 2019 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0146140Courtesy of CHRYSLER GROUP, LLC
WARNING:

Before servicing the steering column the airbag system must be disarmed. Failure to do so may result in accidental deployment of the airbag and possible personal injury.

  1. Position front wheels straight ahead.
  2. Disconnect and isolate the negative (ground) cable from the battery.
  3. Disable and remove the drivers side airbag. Refer to AIR BAG, DRIVER, REMOVAL .
  4. Disconnect all electrical connectors.
  5. Remove the steering wheel bolt (1).
  6. Remove steering wheel damper, if equipped.
  7. Slide the steering wheel (2) off the steering column assembly.