LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Grand Cherokee Laredo, AWD, Automatic T/Case Control >> Repair and Diagnosis >> External Pages >> Different car >> Section 355 (Ignition System (Service Information)) >> Relay, Auto Shut Down >> Removal

Relay, Auto Shut Down: Removal

WARNING: This page is about a different car, the 2019 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

The ASD relay is located in the engine compartment within the Power Distribution Center (PDC). Refer to label on power distribution center cover for relay location.

  1. Remove power distribution center cover.
  2. Remove relay from power distribution center.
  3. Check condition of relay terminals and power distribution center connector terminals for damage or corrosion. Repair if necessary before installing relay.
  4. Check for pin height (pin height should be the same for all terminals within the power distribution center connector). Repair if necessary before installing relay.
scientia non olet · About LEMON Manuals