LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Grand Cherokee Laredo, AWD, Automatic T/Case Control >> Repair and Diagnosis >> External Pages >> Different car >> Section 328 (Cooling System) >> Engine >> Pump, Water >> Installation >> 5.7L/6.4L

Pump, Water: Installation: 5.7L/6.4L

WARNING: This page is about a different car, the 2019 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0137090Courtesy of CHRYSLER GROUP, LLC
NOTE:

5.7L shown in illustration. 6.4L similar.

  1. Clean mating surfaces and install water pump (3). Tighten mounting bolts to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
  2. Install upper metal heater tube.
  3. Install belt tensioner assembly (4). Refer to TENSIONER, BELT, INSTALLATION .
  4. Install idler pulley (5).
  5. Install the lower radiator hose.
  6. Install serpentine belt. Refer to BELT, SERPENTINE, INSTALLATION .
  7. Install the resonator mounting bracket.
  8. Install the upper radiator hose to the thermostat housing (1).
  9. Install the air intake assembly. For 5.7L, Refer to BODY, AIR CLEANER, INSTALLATION . For 6.4L, Refer to BODY, AIR CLEANER, INSTALLATION .
  10. Connect negative battery cable.
  11. Evacuate air and refill cooling system. Refer to STANDARD PROCEDURE .
  12. Check cooling system for leaks. Refer to DIAGNOSIS AND TESTING .
scientia non olet · About LEMON Manuals