LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Grand Cherokee Laredo, AWD, Automatic T/Case Control >> Repair and Diagnosis >> External Pages >> Different car >> Section 324 (Electronic Control Modules (Service Information)) >> Module, Emergency Assistance (EAM) >> Removal >> Removal - Backup Battery

Removal - Backup Battery

WARNING: This page is about a different car, the 2019 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0175234Courtesy of CHRYSLER GROUP, LLC
  1. Remove the Emergency Assistance Module (EAM) from the vehicle. Refer to MODULE, EMERGENCY ASSISTANCE (EAM), REMOVAL .
  2. Remove the EAM backup battery cover (3) from the EAM (1).
  3. Gently pull the backup battery (2) from the EAM (1) and disconnect the negative battery wire connector, then disconnect the positive battery wire connector.
scientia non olet · About LEMON Manuals