Sensor, Oxygen: Installation
WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Install the oxygen sensor (1) and tighten to 50 N.m (37 ft. lbs.).
- Attach the oxygen sensor wire harness retainers (4) and connector (3) to the bracket (1).
- Connect the oxygen sensor harness connector (2).
- Install the cowl extension silencer and the side extensions. Refer to SILENCER, COWL EXTENSION, INSTALLATION
.
- Install the engine cover (1).
- Connect the negative battery cable.
- Using the scan tool, perform Oxygen Sensor Reset function found under ENGINE MISC. FUNCTIONS.