LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Grand Cherokee Laredo, AWD, Automatic T/Case Control >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Fuel System) >> Fuel Injection, Diesel >> Sensor, Accelerator Pedal Position >> Removal

Sensor, Accelerator Pedal Position: Removal

WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0080493Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the drivers side lower dash board close out panel.
  3. Disconnect the APP sensor wire harness connector (1).
  4. Remove the fasteners (2) and the accelerator pedal assembly (3).
scientia non olet · About LEMON Manuals