LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Grand Cherokee Laredo, AWD, Automatic T/Case Control >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (Power Distribution) >> Outlet, Power, Universal Serial Bus >> Installation

Outlet, Power, Universal Serial Bus: Installation

WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power USB outlet into floor console rear trim panel and engage the outlet retainers.
  2. Connect the electrical connector to the power USB outlet.
  3. Install the six screws that secure floor console rear duct to the floor console rear trim panel.
  4. Connect electrical connectors then install the floor console rear trim panel.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals