LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Grand Cherokee Laredo, AWD, Automatic T/Case Control >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Message Center (Service Information)) >> Sensor, Ambient Temperature >> Removal

Sensor, Ambient Temperature: Removal

WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0145862Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the radiator grille assembly. Refer to GRILLE, REMOVAL .
  3. Disconnect the wire harness connector (3) from the ambient temperature sensor (2).
  4. Remove the push pin type retainer (1), and remove the sensor.