LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Gladiator Overland, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Front Axle) >> Fluid >> Standard Procedure >> Standard Procedure - Fluid Fill

Standard Procedure - Fluid Fill

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    GC0081451Courtesy of CHRYSLER GROUP, LLC
  2. Remove axle fill plug (1).
  3. Fill axle with 600ml (0.64 qts.) of Mopar® 75W-90 Synthetic Gear Lubricant. Fluid should be within 3/16" of bottom of fill hole.
  4. Install the axle fill plug and tighten to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
scientia non olet · About LEMON Manuals