LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Gladiator Overland, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Electronic Control Modules (Service Information)) >> Module, Keyless Ignition Node (Kin) >> Removal

Module, Keyless Ignition Node (Kin): Removal

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
GC0144691Courtesy of CHRYSLER GROUP, LLC
NOTE:

Mid ICS shown in illustration, base similar.

  1. Disconnect the negative battery cable.
  2. Remove the instrument cluster center bezel (1). Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL .
  3. Reach through the Integrated Center Stack (ICS) screen opening and disconnect the Keyless Ignition Node (KIN) electrical connector.
  4. Depress on the release tabs and push the KIN out the front of the instrument panel.
scientia non olet · About LEMON Manuals