Module, Anti-Lock Brake System (Abs): Description

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of CHRYSLER GROUP, LLC

NOTE:

The Electronic Stability Control (ESC) may also be referred to as Electronic Stability Program (ESP) depending on the vehicle model year and configuration. Certain components may also reference ESP, ESC, or use the Traction Control System (TCS) symbol.

The Anti-lock Brake System (ABS) Module is a microcontroller-based device which monitors the anti-lock brake system during normal braking and controls it when the vehicle is in an ABS stop. The ABS module also monitors the ESC.

The ABS module (1) is mounted to the Hydraulic Control Unit HCU (2) as part of the Integrated Control Unit (ICU). The ABS module uses a 38-Way connector on the vehicle wiring harness. The power source for the ABS module is through the ignition in the RUN or ON position. The ABS module is on the Controller Area Network-Chassis (CAN-C) bus.