LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Gladiator Overland, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Electronic Control Modules (Service Information)) >> Module, Active Damping Control (ADCM) >> Removal

Module, Active Damping Control (ADCM): Removal

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
GC0152157Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the left side inner trunk fasteners and position the carpet aside.
  3. Disconnect the wire harness connectors and remove the three screws (2) from the Adaptive Damping Control Module (ADCM).
  4. Release the integral latches that secure the ADCM (1) to the mounting bracket and slide the module upward to remove from the vehicle.
scientia non olet · About LEMON Manuals