Section 8 (Cooling System): Engine: Thermostat: Removal: 3.6L
WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Do not loosen radiator draincock with system hot and pressurized. Serious burns from coolant can occur.
CAUTION:
The Thermostat and housing is serviced as an assembly. Do not remove the thermostat from the housing. Damage to the thermostat may occur.
- Disconnect and isolate the negative battery cable.
- Remove the engine cover.
- Remove the air cleaner body. Refer to REMOVAL .
- Drain the cooling system. Refer to DRAINING .
- Remove the upper radiator hose from the thermostat housing (1).
- Remove the bolts and remove the thermostat housing (1) with thermostat (3).
- Remove and DISCARD the thermostat housing gasket.