LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Gladiator Altitude, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Cooling System) >> Engine >> Fan, Cooling >> Removal >> 5.7L Dual Fan

5.7L Dual Fan

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the air cleaner body. Refer to REMOVAL .
  3. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  4. If equipped, remove the lower closeout panel.
  5. Drain the cooling system. Refer to DRAINING  .
  6. If equipped, install the lower closeout panel.
  7. Remove the support and lower the vehicle.
    GC0144930Courtesy of CHRYSLER GROUP, LLC
  8. Remove the upper radiator hose (2).
    GC0144533Courtesy of CHRYSLER GROUP, LLC
  9. Disconnect the cooling fan wire harness connector (1).
  10. Remove the bolts (2) and the radiator cooling fan assembly (3).
    GC0144322Courtesy of CHRYSLER GROUP, LLC
  11. Remove the fan motor wiring harness (5) from the fan shroud (6).
  12. Remove the fan blade (4) from the fan motor.
  13. Remove the bolts (2) that support the fan motor to the fan shroud (6).
scientia non olet · About LEMON Manuals