LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Gladiator Altitude, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Cooling System) >> Engine >> Fan, Cooling >> Removal >> 3.6L Dual Fan

3.6L Dual Fan

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

If replacing the fan blades, the dual fan blades can be replaced separately from the motor. Single motor fan blades are balanced to the motor and must be replaced as a fan/motor assembly.

  1. Disconnect and isolate the negative battery cable.
  2. Remove the air cleaner body. Refer to REMOVAL .
    GC0144533Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the cooling fan wire harness connector (1).
  4. Remove the cooling fan mounting bolts (2).
  5. Remove the radiator cooling fan assembly (3) from the vehicle.
    GC0144322Courtesy of CHRYSLER GROUP, LLC
  6. Remove the fan motor wiring harness (5) from the fan shroud (6).
  7. Remove the fan blade (4) from the fan motor.
  8. Remove the bolts (2) that support the fan motor to the shroud (6).
scientia non olet · About LEMON Manuals