LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Gladiator Altitude, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Fuel System) >> Fuel Injection, Gas >> Valve, Short Runner >> Removal

Valve, Short Runner: Removal

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the intake manifold. Refer to REMOVAL, 5.7L , and MANIFOLD, INTAKE, REMOVAL, 3.6L .
    GC0148451Courtesy of CHRYSLER GROUP, LLC
  3. Remove bolts (1) and the Short Runner Valve (SRV) actuator (2).
    GC0148453Courtesy of CHRYSLER GROUP, LLC
  4. Remove and discard the SRV actuator rubber O-ring seal (1).
scientia non olet · About LEMON Manuals