LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Gladiator Altitude, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Electronic Control Modules (Service Information)) >> Module, Tire Pressure Monitoring (TPM) >> Removal

Module, Tire Pressure Monitoring (TPM): Removal

WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear RH splash shield. Refer to SHIELD, SPLASH, REAR WHEELHOUSE, REMOVAL .
    GC0170346Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the Tire Pressure Monitoring (TPM) Module electrical connector (1).
  3. Remove the front TPM module nuts (2), then remove the TPM module nuts (3) from the body flange.
  4. Remove the TPM module from the vehicle.
scientia non olet · About LEMON Manuals